How to Use the Ender 5 Plus 3D Printer
If you need assistance, ask a supervisor
- 1. Slice your file
- Download PrusaSlicer on your computer and the printer configuration file, which needs to be then imported to PrusaSlicer. The links can be found in the table at the bottom.
- 2. Connect to WiFi
- Make sure you are connected to the EWS WiFi network (2g4 or 5g0). Ask a supervisor for the password if you don't have it.
- 3. Open the web portal
- Open a web browser on your computer, go to the web portal and upload the
.gcodefile exported from PrusaSlicer by dragging it into the page.
- 4. Start the print
- Find the “Print” button on the printer’s home menu and select it to see the uploaded files. Find your file from there and click on it to start the print. There will be a confirmation menu, where you’ll need to select “print” again.
| Description | Link |
|---|---|
| PrusaSlicer | http://www.tinyurl.com/prusa-slicer |
| Printer Configuration Files | https://tinyurl.com/ender5pconfig |
| Web Portal for Printer | http://ender5plus.local |